Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Feb 2006
    Location
    Los Angeles
    Posts
    1

    unbalanced to balanced connectors???

    hi guys...

    i had a question.
    i'm connecting my MPC2000XL, which is unbalanced, into my digi002, which is balanced/unbalanced.

    are there cables that are TRS on one end and TS on the other?

    i mean...does it make sense to connect from the MPC as TS and to the digi002 as TRS?

    or does it not even matter?
    will it make ANY difference at all as if i connected them from TS to TS?

    _chris

  2. #2
    Senior Member SC358's Avatar
    Join Date
    May 2005
    Location
    NYC
    Posts
    608
    Blog Entries
    2

    Re: unbalanced to balanced connectors???

    Hi Chris -
    Since you stated that the input to your Digi002 takes both balance & unbalance, yes you can connect them with a cable that is TS to TS. I suggest to be consistant in this manner rather than using a leftover cable that was built as TRS to TS.

    Hope this eases your concerns.

    SC358
    Relationships are based on compromises - behavior accepted is behavior repeated.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube