Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21
    I'm refering to slaving the in-ear mix to the main mix channel faders by using post fader aux instead of pre fader aux. It's really nice when one can set the mix and go through a whole show without touching it, but how often does that happen? The talent may not complain (was I complaining? sorry) when the in-ear mix is changed to compensate for something happening in the House mix, (which I try to do as descreetly and as little as possible), but I would still rather use pre-fader aux sends for any monitor mixes anyway, if I have to get my monitor/in-ear mix from the FOH desk that is. I was agreeing with you, and still am, just that I think of using posts for monitors as more of a last resort rather than a preferred strategy.
    'I think my intimate relationship with electronics started as a child when I was playing with a screwdriver and a wall plug, Doc, and...'

  2. #22
    Quote
    Quote: penniesfromheaven
    View Post
    I was agreeing with you, and still am, just that I think of using posts for monitors as more of a last resort rather than a preferred strategy.
    I usually use both pres and posts, as some things [like decks winding, cuing, tone, countdowns] should not be heard by talent but others from the same source [content of the tapes hitting air/speakers] should be, while other sources should alway be heard or never be heard.
    Eric Adler (tonsofpcs)
    http://www.videoproductionsupport.com/ Chat at: http://tinyurl.com/vpschat
    Follow me on twitter: @videosupport @eric_adler

  3. #23
    OK, I think I get what you mean. Imma gonna do some playin around with it.
    'I think my intimate relationship with electronics started as a child when I was playing with a screwdriver and a wall plug, Doc, and...'

  4. #24
    Quote
    Quote: penniesfromheaven
    View Post
    I do the same thing at my own church. Interesting, huh? Are you sure they are not aux bus faders (knobs)? What model board is it? That would be quicker for me to look it up. Then I can tell ya in a heart beat what to do with them.

    I know that this post was a long time ago, but I finaly got the make of the mixer. The only thing I know, is that is a Makie
    Hope this helps.

  5. #25
    if you can get a picture of it or a model, that would help immensely, or even just go to http://www.mackie.com/ and look for the one you have and tell us which model it looks most like.
    Eric Adler (tonsofpcs)
    http://www.videoproductionsupport.com/ Chat at: http://tinyurl.com/vpschat
    Follow me on twitter: @videosupport @eric_adler

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube