Results 1 to 5 of 5

Thread: Dsr-45p

  1. #1
    New Member
    Join Date
    Apr 2007
    Location
    HYDERABAD
    Posts
    3

    Dsr-45p

    We have problem with DSR-45P DVCAM not initialising fire wire , We changed IC in JC-21 board even though its not recognising with fire wire in FCP
    What will be the main problem suggest me?

    Shanthikumar

  2. #2
    ok slow down.


    So FCP is not recognizing the Firewire, or the card/computer is not recognizing it?
    Manoni Productions
    Pass me another beer...You are still ugly!

  3. #3
    New Member
    Join Date
    Apr 2007
    Location
    HYDERABAD
    Posts
    3

    Dsr-45p 2

    We connected the DV deck DSR-45P to FCP through fire wire, FCP is saying that Check again ( No communication) same thing we did in 3 FCP systems and we changed 3 fire wires, and other DV deck DSR-45P we checked in all 3 FCP systems its working.
    Please I need solution?

  4. #4
    step one. Call the manufacture and see if there is a driver that needs to be installed in order to have the deck recognized. after you do that look into the 2pop.com forums. be-careful there though, there is no such thing as a non Highly technical answer from that website
    Manoni Productions
    Pass me another beer...You are still ugly!

  5. #5
    New Member
    Join Date
    Apr 2007
    Location
    HYDERABAD
    Posts
    3

    Thank U

    Thank you kawsakimx6 for your reply which I got, special thanks for suggesting me the very good site 2pop.com

    Shanthikumar

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube