Results 1 to 9 of 9
  1. #1

    Manual For Hitachi RU-C1 CCU

    Hi can anyone help me find a download for the manual to my Hitachi RU-C1 CCU unit for my Hitachi Z-One Cameras?
    Thanks
    Keith

  2. #2
    My quick search turns up nothing, but if there is something specific you need to know about, I (or others here) may be able to help you.
    Eric Adler (tonsofpcs)
    http://www.videoproductionsupport.com/ Chat at: http://tinyurl.com/vpschat
    Follow me on twitter: @videosupport @eric_adler

  3. #3
    Hi, I'm also looking for a manual so if you happened to have found a source, could you let me know?

    Eric, hi, any chance you would have the pinout details for the rear intercom/tally port? I'd like to interface an RU-C1 with an intercom system but I'm not sure what the pinout would be.

    Thanks!
    ~ibennetch

  4. #4
    you mean this?






    good luck i dont know if there was ever a manual for these. I gave up on this POS about 4 years ago
    Manoni Productions
    Pass me another beer...You are still ugly!

  5. #5
    If one of you can post detailed images somewhere, I can look at it and have some friends look at it and we may be able to tell you the most likely wirings and operating information. (Operating information is likely easy, as most CCUs use similar methods)
    Eric Adler (tonsofpcs)
    http://www.videoproductionsupport.com/ Chat at: http://tinyurl.com/vpschat
    Follow me on twitter: @videosupport @eric_adler

  6. #6
    New Member
    Join Date
    Nov 2007
    Location
    Germany
    Posts
    1

    Manual

    Hi, i have the complete manual RU C1, but i have to scan the pages you neet, manual is in english, please tell me what you need, to scan everything is a lot of work, otherwise i can go to a copyshop and copy the whole manual. This is arount 50 Euros plus Shiping to you.

    Sorry my english is bad

    Greetings Frank
    you can sent me a mail frank(at)oldie-radio.de

  7. #7
    Hi folks, sorry I've been gone so long. You know how things go; this is a back-burner project so it seems I never have time for it. Anyway,

    Quote
    Quote: tonsofpcs
    View Post
    If one of you can post detailed images somewhere, I can look at it and have some friends look at it and we may be able to tell you the most likely wirings
    I've attached a picture that shows what I'm referring to -- the tally port whose pinout I wish to know is of course centered on the top; it is very standard, but none of the facilities I have access to use that configuration anymore.

    Quote
    Quote: Frankbj60
    View Post
    Hi, i have the complete manual RU C1, but i have to scan the pages you neet, manual is in english, please tell me what you need, to scan everything is a lot of work, otherwise i can go to a copyshop and copy the whole manual. This is arount 50 Euros plus Shiping to you.
    I deeply appreciate the offer. If you happen to see a section specifically dealing with this pinout I would be grateful if you would scan only that page; no need to run to the copy shop for me though. Thank you for the offer.
    Attached Images Attached Images  

  8. #8

    C1 Camera power

    I am wondering how much power a C1 camera consumes and if I can just power it off a bescor battery power pack.

  9. #9
    You can run most professional equipment with the proper connector from a 12v nominal power source (see the DC 12V in on that CCU).
    That tally/intercom connector is a DIN-5, and looking at the board inside the CCU, you may be able to tell which pins are which (tally related would likely be isolated by transistor or optoisolator, intercom would go through some audio gain circuitry).
    Eric Adler (tonsofpcs)
    http://www.videoproductionsupport.com/ Chat at: http://tinyurl.com/vpschat
    Follow me on twitter: @videosupport @eric_adler

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube