Results 1 to 5 of 5
  1. #1

    Please help me with my PA system!

    This is my issue. Long story short, I have included a graphic to show how I am hooking this up...follow the colored lines. I get no sound out of this. Does this look right or am I wrong? I have 2 amps, 1 crossover, mixing board, 2 subs, and 2 mains. I get nothing. I was told to run bridge mode on the crossover. So only 1 side actually is actually configured on the front of the crossover. I'm the drummer, so bare with me =)

    you can e-mail me if you want to help or have a suggestion will at inthesaucepan.com THANK YOU!!


  2. #2
    Check to ensure the mode switches are in the proper positions for "Stereo 2-way"
    Eric Adler (tonsofpcs)
    http://www.videoproductionsupport.com/ Chat at: http://tinyurl.com/vpschat
    Follow me on twitter: @videosupport @eric_adler

  3. #3
    Quick check: patch directly from mixer into power amps. Run at low level. See if you get sound. This will tell you whether the crossover is the source of the problem.

  4. #4

    got it

    I got it to work! It was hooked up right, I was just overlooking a knob on the mixing board that was turned down. SLAP FOREHEAD. DUH!

  5. #5
    D'oh! glad you found it! Nice graphic, BTW

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube