Results 1 to 4 of 4
  1. #1

    capturing video from camcorder to laptop

    I am trying to capture video from my sony dcr-trv27 mincam to my sony vaio laptop computer using a firewire cable. I have Adobe premier pro cs3software that I am trying to use but says i'm not connected, is there some setting I need to change to get it to recognize my connection?
    sorry if this is a dumb question.
    thanks

  2. #2

  3. #3
    Make sure that the camera is switched off when you connect, then when it is all cabled switch the camera on and set it to plaback mode rather than record, this should help! Umm either than that, try another camera if you can just to rule out the fact it might be a dodgy connection on the camera

  4. #4
    when you plug it in it should come up in my computer. cheek if it's there and post back.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube