Results 1 to 2 of 2
  1. #1

    Help in connecting PA system

    Hi all. I am really in need of help in connecting a PA system. I have been trying to connect 4 (old) cone speakers of 40 watts each to a new (Toa 900 Series II P-912 MK2 Amplifier) its output rated 120 watts. I am using a new audio mixer (Peavey RQtm 2310).

    Im using 4 mics connected to the mixer. On the mixer the mic volume is at the maximum level as well as the gain. The amp also is at its max level but still does not produce enough volume.

    I was thinking of changing the amp to a higher watts but I according to Rrybaker I have to match the ohms and the wattages.

    Can anyone help me or give an example on I could connect my system.

    Thank you very much for your help.

    Tui

  2. #2
    Member
    Join Date
    Jan 2005
    Location
    Norman, OK
    Posts
    37
    Sorry it took so long to reply, but I did on your other post. Check it out and get back to me.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube