Results 1 to 2 of 2
  1. #1

    1/4" or 1/8" TRS to left and right XLR wiring

    I'm recording from my electronic piano and any other source with a 1/4, line out, or headphone jack to a field recorder with L/R XLR inputs. I know to connect tip and ring to the #2 pins on each XLR, but am uncertain if I connect the cold/negative to pins 1 and 3, or just 3? The recorder has Phantom power which is manually turned on or off by switch.
    Last edited by Ozburg; 21st Jan 2011 at 21:00.

  2. #2
    No need for anybody to respond to this thread. I've discovered that may purposes require the signal impedance to be properly transformed from Hi-Z to Lo-Z and that a simple pin-to-pin wiring won't suffice the signal integrity I want.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube