Results 1 to 6 of 6
  1. #1
    New Member
    Join Date
    Nov 2010
    Location
    Hyderabad
    Posts
    3

    Connecting 2 amplifiers

    Guys,

    I want to connect speaker Out put from Ahuja make "UB-30 : 25 WATTS • AC & 12V DC Operation" Amplifier as Mic Input to Ahuja make "SSA-100M : 100 WATTS • AC & 24V DC Operation "


    Can I Make it


    UB-30 : 25 WATTS • AC & 12V DC Operation
    larger view | print | send enquiry


    SPECIFICATIONS

    Power Output
    30W RMS Max., 25W RMS at 10% THD
    Input Channels
    2 × Mic 1.0mV / 4.7k,
    Frequency Response
    150-10,000Hz ±3dB
    1 × Aux 100mV / 470k1 × Aux 100mV / 470k
    Signal to Noise Ratio
    60dB
    Tone Controls
    -10dB at 10kHz
    Speaker Outputs
    4, 8, 16 & 100V
    Power Supply
    AC: 220-240V 50/60Hz DC: 12V (Car Battery)
    Power Consumption
    AC: 80VA DC: 1.2A
    Dimensions
    W180 × H80 × D190 mm
    Weight
    4.0kg


    SSA-100M : 100 WATTS • AC & 24V DC Operation
    larger view | print | send enquiry


    SPECIFICATIONS

    Power Output
    130W Max., 100W RMS at 10% THD
    .
    90W RMS at 5% THD, 80W RMS at 2% THD
    Output Regulation
    2 dB, no load to full load at 1kHz
    Input Channels
    5 × Mic 0.65mV/4.7k, 1 × Aux 50mV/470k
    .
    1 × Aux 150mV/470k
    Frequency Response
    50-15,000Hz ±3dB
    Signal to Noise Ratio
    60dB
    Tone Controls
    Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
    Outputs
    Preamp 200mV/600, Line 1V/1k
    Speaker Outputs
    4, 8, 16, 70V & 100V
    Power Supply
    AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
    Power Consumption
    AC: 220VA DC: 3A
    Dimensions
    W420 × H135 × D290 mm
    Weight
    10.5kg

  2. #2
    Senior Member SC358's Avatar
    Join Date
    May 2005
    Location
    NYC
    Posts
    608
    Blog Entries
    2
    Hello sunilgogi,
    Glad you included all the technical details. The answer to your question is - no.

    In the small amp specifications, there is no indication of a microphone level output. Unless there is mic level output going to mic level input OR line level output of the small amp, connected to a line level input, is the only time you can connect.

    What are you trying/hoping to accomplish?
    SC358
    Relationships are based on compromises - behavior accepted is behavior repeated.

  3. #3
    New Member
    Join Date
    Nov 2010
    Location
    Hyderabad
    Posts
    3
    Thanks a Lot

  4. #4
    New Member
    Join Date
    Nov 2010
    Location
    Hyderabad
    Posts
    3
    Thanks Sir for the advice .
    Then how can i connect two mics to a single mic input of an amplifier



    Reply
    Sunil

  5. #5
    Senior Member SC358's Avatar
    Join Date
    May 2005
    Location
    NYC
    Posts
    608
    Blog Entries
    2
    A microphone mixer will allow you to control each microphone's audio level. It's possible to find a mixer with a mic level output but most likely, you'll find one with a line level output which would go into the line (not mic) input of the amp.
    SC358
    Relationships are based on compromises - behavior accepted is behavior repeated.

  6. #6
    With more amplifiers you're going to need either more wire or larger wire. If you’ve already installed a power wire for an existing amplifier you may choose to simply install another wire for additional amplifiers.

    _____________________
    VLC Download

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube