Results 1 to 3 of 3

Thread: HD Cables

  1. #1

    HD Cables

    Hello To All....
    I Have a question regarding HD-SDI cables, I Use a cable named ( PLATINUM 75 OHMS OFC LOW LOSS DIGITAL COAXIAL CABLE 14/0.2 MM RoHS COMPLIANT ) for my Vision Mixer set up for Panasonic MX70 and this cable gives me a good result for it, But now I'm Upgrading to HD-SDI Switcher MX100 or Sony Mcs8m, So will this cables gives me a full HD-SDI Result, Which a cable needs ? Cable lenght is around 60 to 100m.
    Please suggest me, Thank You.

  2. #2
    Senior Member SC358's Avatar
    Join Date
    May 2005
    Location
    NYC
    Posts
    608
    Blog Entries
    2
    Quote
    Quote: Media Person
    View Post
    I Use a cable named ( PLATINUM 75 OHMS OFC LOW LOSS DIGITAL COAXIAL CABLE 14/0.2 MM RoHS COMPLIANT ) ... So will this cables gives me a full HD-SDI Result, Which a cable needs ?
    Hi~ Your description is incomplete. The manufacturer and cable model number is not shown, so it cannot be determined if your existing cable can be used for HD-SDI signal. However you can use Belden 1505A, 1694A or F, 1855A for HD-SDI signals.
    SC358
    Relationships are based on compromises - behavior accepted is behavior repeated.

  3. #3
    Member KennyFeng's Avatar
    Join Date
    Apr 2009
    Location
    Nanchang,Mainland China
    Posts
    12
    Hi,guys. I am using Belden 1694A RG-6 for SD-SDI signal and 7731A RG-11 for HD-SDI,how far can the signals travel before encountering "digital-cliffs"? Thanks.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Subscribe to us on YouTube